Translations:PAVEsense/122/en: Difference between revisions

From ASAsense Documentation (staging)

FuzzyBot (talk | contribs)

700 edits
en translation
 
FuzzyBot (talk | contribs)
700 edits
m FuzzyBot moved page Translations:PaveSense/122/en to Translations:PAVEsense/122/en without leaving a redirect: Part of translatable page "PaveSense"
 
(No difference)

Latest revision as of 12:02, 14 October 2026

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (PAVEsense)
For numerical parameters you set the lower and upper limit of the colour scale under '''Gradient''' (see [[#Schalen_en_kleuren|Scales and colours]]). For Macro1–Waviness both limits should be between 0 and 1; for the eIRI, 0 – 10 is a good choice. For the Driving Quality you choose the classes that act as the "best" and "worst" ends of the scale (by default ''Very Good'' to ''Poor''). For ''Surface Type'' there is no gradient: the map then shows a fixed legend at the bottom left (''Asphalt'', ''Brick'', ''Cobblestone'', ''Concrete'', ''Other'', ''No data'').

For numerical parameters you set the lower and upper limit of the colour scale under Gradient (see Scales and colours). For Macro1–Waviness both limits should be between 0 and 1; for the eIRI, 0 – 10 is a good choice. For the Driving Quality you choose the classes that act as the "best" and "worst" ends of the scale (by default Very Good to Poor). For Surface Type there is no gradient: the map then shows a fixed legend at the bottom left (Asphalt, Brick, Cobblestone, Concrete, Other, No data).

Retrieved from "https://docs-staging.asasense.com/index.php?title=Translations:PAVEsense/122/en&oldid=802"